How to Use Rivets Without a Gun | Without Expensive Riveter Tool

Use A Rivet Without a Gun

Learn how to utilise rivets without the need for a gun. Rivets are used to seal two materials together as well as for ornamentation. They can be small and found on various clothing items, or they can be large and found in autos, machinery, and a variety of other places. Normally, rivets are applied to an item with a rivet gun or a special rivet tool, but what if you don’t have one? Is it difficult to learn to utilise rivets without a gun? Surprisingly, it is not tough, but rather simpler than you think.

What Is a Rivet Nut?

Rivet nuts can be made of plastic or metal (metal). They are also known as blind rivets since they can be fastened totally from one side of the job. It also appears as if they appeared by magic if they are properly fitted. There are no screws or nails holding them in place. When you drill a hole and insert a rivet, the rivet is essentially pushed on both sides, changing shape and becoming one piece of plastic or metal.

One of the reasons rivet nuts are so popular is because they are extremely tough, and once placed, they are nearly impossible to remove or dislodge. They can be rapidly and simply put into a blind hole, especially if you have a rivet gun. Rivet nuts frequently cause a bulge on the other side of the work or disappear into a sleeve, making them less visible. Rivets can be found in anything from race cars to refrigerators, yachts, golf carts, and even exhibition cases.

When the rivets are properly installed, they become distorted to prevent them from falling out of the item. Rivets are strong enough to hold themselves together and do not require extra securing, though many people screw them in with screwdrivers or even bolts after they are installed. Learning to rivet without a gun isn’t difficult, but it does present some difficulties. This means you may need to practise a few times before you get it properly.

Using a Screwdriver to Install Plastic Rivets

Plastic rivets can be found in a variety of products, including electronics, furniture, certain cars, and even toys. Because they are so powerful, it can be difficult to separate them at times. Remember that rivets are occasionally two-part objects that, when properly fitted, become one item, though this is not always the case. Drive the plastic rivets through the holes you’ve designated for the rivets, making sure to push them hard. Why? As a result, the stem inside the rivet protrudes from the top.

After that, proceed to take the rivet out of the hole. You might want to use pliers for this so that your hand isn’t accidentally harmed. When you take the rivet out, the threads inside the rivet become locked at the top. As you continue to tug on the rivet, the pin will eventually break and tighten. As previously said, it may not occur correctly the first time you attach a plastic rivet, and it may even destroy the rivet. However, with a little practice, the task will become far more manageable.

Using a Screwdriver to Install Solid Rivets

Solid rivets function differently than plastic rivets. Plastic rivets can be inserted with your bare hands and nothing else, while solid rivets cannot. You’ll want a bolt with its own nut and one that can easily fit into the rivet for the greatest results. First, insert the rivet into the item’s hole, followed by the bolt through the washer or bushing. This is what you’ll be doing to thread onto the loose nut and get it to work properly.

Then, insert the bolt as far as it will go. If you don’t get this step right, the rest of the steps won’t matter. After inserting the bolt, manually screw the rivet until it fits properly inside. Once you’ve determined that it fits perfectly, loosen the bolt that encircled the rivet. If done correctly, it should now secure the pin and be quite well-deformed.

The process should be finished at this point, however, keep in mind that placing steel rivets without a gun can be tricky.

Steel rivets are very strong, therefore you may need to use a tool to properly attach them. Although this strategy works, you may need to practise it for a while to perfect it.

Things to Remember

The majority of the time. A bolt with a nut that fits into the rivet nut is required. If you do not have a certain rivet tool or gun. It would be much better if you had a washer or a larger bushing that fit securely around the bolt. Even if you don’t have a rifle, you’ll need a few tools. An open-end wrench and a set of water pump pliers are included (or a second wrench that can hold the top of the machine bolt or screw tightly).

Remember to keep this in mind once you’ve inserted the rivet nut into the hole. Thread on the loose nut, then thread the bolt through either the bushing or washer. Insert the bolt all the way to the end. then physically screw it in until the washer and nut prevent you from doing so any further. Finally, you’ll loosen the nut and unscrew the bolt from the rivet nut, in which case.

How to Soften Veg Tan Leather

should be tightly fastened This strategy, like the others discussed above, does not always work. To see the outcomes, you must apply the techniques to your project.


The main conclusion is that a rivet gun is the best tool for putting a rivet nut. This is always true. Some individuals use an anvil to hammer the rivet nut in, but this method has drawbacks. Test out these strategies to discover whether they work for you. This may take some practice, but it is a far better option than not getting the task done at all.

The post  How to Use Rivets Without a Gun appeared first on

The post How to Use Rivets Without a Gun | Without Expensive Riveter Tool appeared first on

The post How to Use Rivets Without a Gun | Without Expensive Riveter Tool appeared first on

The post How to Use Rivets Without a Gun | Without Expensive Riveter Tool appeared first on